Torque Settings

All Sign Systems brackets and clips are universal and will fit any range of All Sign Systems channel extrusions. To optimise the fit and to resist any tendency to twist or "pull through" the channel under high torque the All Sign Systems LIP-LOK bolt is supplied with brackets and clips. All Sign Systems LIP-LOK bolts have an ultimate tensile strength of 70N/mm2 and should be tightened up to a maximum torque load of 25Nm using a calibrated torque wrench. Failure to correctly torque up bolts on brackets and clips is the single most common cause of sign installation failure. It is recommended, before fitting, that all bolts are lightly oiled to avoid binding when tightening nuts. Washers should always be fitted under the M8 nut; this strengthens the bracket when fully tensioned.

Torque Settings for Lip-Lok Bolts
Maximum: 25Nm
Recommended: 22Nm
Minimum: 20Nm

ALL SIGN SYSTEMS Limited , 31 Maurice Road, Penrose, Auckland, New Zealand 1061
Call us now:  

09 930 1258

ALL SIGN SYSTEMS LIMITED ©2024