Ground Sockets

GRDSKT060X400, 400MM GRD SKT FOR 60MM POLE

400MM GRD SKT FOR 60MM POLE

The ALL SIGN SYSTEMS Ground socket is manufactured from strong structural grade 6261 T5 or T6 alloy with Stainless Steel T304 security locking screws to retain the post. All ground sockets are powder coated to prevent corrosive attack of the aluminium by the concrete. Ground Sockets should be installed with no more than 30-60mm showing above ground level. Security locking screws should be orientated in the direction of the sign face and torqued to 18Nm2. Non-standard lengths are available to suit specific design requirements. All ground sockets supplied are fitted with a cap on the base. The cap acts as a pole stop and provides a significant advantage for installers as it prevents concrete from entering the socket when it is being positioned in the foundation. The ALL SIGN SYSTEMS Ground Socket is a purpose made product with a wall thickness of 5mm which prevents damage to the socket wall in accident situations - facilitating simple pole replacement. The ground socket for the 89,102 and 114mm diameter fluted poles have a raised internal wedge that the pole flute slides into to counter pole rotation. When used in concrete foundations, substantial enough to withstand crash impact, the ALL SIGN SYSTEMS Ground Socket has the following advantages: • Economical and time saving installations avoiding the use of props to support poles while concrete foundations cure. • Eliminates vandalism to poles/foundations before concrete has set. • Economical replacement of damaged poles with no need to dig out and replace foundations. Simply remove the damaged pole from the ground socket and replace. Only one site visit required, no construction workers or plant and the damaged sign is replaced with minimal delay.

$32.20

GRDSKT060X600, 600MM GRD SKT FOR 60MM POLE

600MM GRD SKT FOR 60MM POLE

The ALL SIGN SYSTEMS Ground socket is manufactured from strong structural grade 6261 T5 or T6 alloy with Stainless Steel T304 security locking screws to retain the post. All ground sockets are powder coated to prevent corrosive attack of the aluminium by the concrete. Ground Sockets should be installed with no more than 30-60mm showing above ground level. Security locking screws should be orientated in the direction of the sign face and torqued to 18Nm2. Non-standard lengths are available to suit specific design requirements. All ground sockets supplied are fitted with a cap on the base. The cap acts as a pole stop and provides a significant advantage for installers as it prevents concrete from entering the socket when it is being positioned in the foundation. The ALL SIGN SYSTEMS Ground Socket is a purpose made product with a wall thickness of 5mm which prevents damage to the socket wall in accident situations - facilitating simple pole replacement. The ground socket for the 89,102 and 114mm diameter fluted poles have a raised internal wedge that the pole flute slides into to counter pole rotation. When used in concrete foundations, substantial enough to withstand crash impact, the ALL SIGN SYSTEMS Ground Socket has the following advantages: • Economical and time saving installations avoiding the use of props to support poles while concrete foundations cure. • Eliminates vandalism to poles/foundations before concrete has set. • Economical replacement of damaged poles with no need to dig out and replace foundations. Simply remove the damaged pole from the ground socket and replace. Only one site visit required, no construction workers or plant and the damaged sign is replaced with minimal delay.

$35.65

GRDSKT060X1MWH, GRD SKT 60MM X 1M WH

GRD SKT 60MM X 1M WH

The ALL SIGN SYSTEMS Ground socket is manufactured from strong structural grade 6261 T5 or T6 alloy with Stainless Steel T304 security locking screws to retain the post. All ground sockets are powder coated to prevent corrosive attack of the aluminium by the concrete. Ground Sockets should be installed with no more than 30-60mm showing above ground level. Security locking screws should be orientated in the direction of the sign face and torqued to 18Nm2. Non-standard lengths are available to suit specific design requirements. All ground sockets supplied are fitted with a cap on the base. The cap acts as a pole stop and provides a significant advantage for installers as it prevents concrete from entering the socket when it is being positioned in the foundation. The ALL SIGN SYSTEMS Ground Socket is a purpose made product with a wall thickness of 5mm which prevents damage to the socket wall in accident situations - facilitating simple pole replacement. The ground socket for the 89,102 and 114mm diameter fluted poles have a raised internal wedge that the pole flute slides into to counter pole rotation. When used in concrete foundations, substantial enough to withstand crash impact, the ALL SIGN SYSTEMS Ground Socket has the following advantages: • Economical and time saving installations avoiding the use of props to support poles while concrete foundations cure. • Eliminates vandalism to poles/foundations before concrete has set. • Economical replacement of damaged poles with no need to dig out and replace foundations. Simply remove the damaged pole from the ground socket and replace. Only one site visit required, no construction workers or plant and the damaged sign is replaced with minimal delay.

$52.90

GRDSKT076X400, 400MM GRD SKT FOR 76MM POLE

400MM GRD SKT FOR 76MM POLE

The ALL SIGN SYSTEMS Ground socket is manufactured from strong structural grade 6261 T5 or T6 alloy with Stainless Steel T304 security locking screws to retain the post. All ground sockets are powder coated to prevent corrosive attack of the aluminium by the concrete. Ground Sockets should be installed with no more than 30-60mm showing above ground level. Security locking screws should be orientated in the direction of the sign face and torqued to 18Nm2. Non-standard lengths are available to suit specific design requirements. All ground sockets supplied are fitted with a cap on the base. The cap acts as a pole stop and provides a significant advantage for installers as it prevents concrete from entering the socket when it is being positioned in the foundation. The ALL SIGN SYSTEMS Ground Socket is a purpose made product with a wall thickness of 5mm which prevents damage to the socket wall in accident situations - facilitating simple pole replacement. The ground socket for the 89,102 and 114mm diameter fluted poles have a raised internal wedge that the pole flute slides into to counter pole rotation. When used in concrete foundations, substantial enough to withstand crash impact, the ALL SIGN SYSTEMS Ground Socket has the following advantages: • Economical and time saving installations avoiding the use of props to support poles while concrete foundations cure. • Eliminates vandalism to poles/foundations before concrete has set. • Economical replacement of damaged poles with no need to dig out and replace foundations. Simply remove the damaged pole from the ground socket and replace. Only one site visit required, no construction workers or plant and the damaged sign is replaced with minimal delay.

$35.65

GRDSKT076X600, 600MM GRD SKT FOR 76MM POLE

600MM GRD SKT FOR 76MM POLE

The ALL SIGN SYSTEMS Ground socket is manufactured from strong structural grade 6261 T5 or T6 alloy with Stainless Steel T304 security locking screws to retain the post. All ground sockets are powder coated to prevent corrosive attack of the aluminium by the concrete. Ground Sockets should be installed with no more than 30-60mm showing above ground level. Security locking screws should be orientated in the direction of the sign face and torqued to 18Nm2. Non-standard lengths are available to suit specific design requirements. All ground sockets supplied are fitted with a cap on the base. The cap acts as a pole stop and provides a significant advantage for installers as it prevents concrete from entering the socket when it is being positioned in the foundation. The ALL SIGN SYSTEMS Ground Socket is a purpose made product with a wall thickness of 5mm which prevents damage to the socket wall in accident situations - facilitating simple pole replacement. The ground socket for the 89,102 and 114mm diameter fluted poles have a raised internal wedge that the pole flute slides into to counter pole rotation. When used in concrete foundations, substantial enough to withstand crash impact, the ALL SIGN SYSTEMS Ground Socket has the following advantages: • Economical and time saving installations avoiding the use of props to support poles while concrete foundations cure. • Eliminates vandalism to poles/foundations before concrete has set. • Economical replacement of damaged poles with no need to dig out and replace foundations. Simply remove the damaged pole from the ground socket and replace. Only one site visit required, no construction workers or plant and the damaged sign is replaced with minimal delay.

$46.00

GRDSKT076X1MWH, GRD SKT 76MM X 1M WH

GRD SKT 76MM X 1M WH

The ALL SIGN SYSTEMS Ground socket is manufactured from strong structural grade 6261 T5 or T6 alloy with Stainless Steel T304 security locking screws to retain the post. All ground sockets are powder coated to prevent corrosive attack of the aluminium by the concrete. Ground Sockets should be installed with no more than 30-60mm showing above ground level. Security locking screws should be orientated in the direction of the sign face and torqued to 18Nm2. Non-standard lengths are available to suit specific design requirements. All ground sockets supplied are fitted with a cap on the base. The cap acts as a pole stop and provides a significant advantage for installers as it prevents concrete from entering the socket when it is being positioned in the foundation. The ALL SIGN SYSTEMS Ground Socket is a purpose made product with a wall thickness of 5mm which prevents damage to the socket wall in accident situations - facilitating simple pole replacement. The ground socket for the 89,102 and 114mm diameter fluted poles have a raised internal wedge that the pole flute slides into to counter pole rotation. When used in concrete foundations, substantial enough to withstand crash impact, the ALL SIGN SYSTEMS Ground Socket has the following advantages: • Economical and time saving installations avoiding the use of props to support poles while concrete foundations cure. • Eliminates vandalism to poles/foundations before concrete has set. • Economical replacement of damaged poles with no need to dig out and replace foundations. Simply remove the damaged pole from the ground socket and replace. Only one site visit required, no construction workers or plant and the damaged sign is replaced with minimal delay.

$69.00

GRDSKT089X1MWH, GRD SKT 89MM X 1M WH

GRD SKT 89MM X 1M WH

The ALL SIGN SYSTEMS Ground socket is manufactured from strong structural grade 6261 T5 or T6 alloy with Stainless Steel T304 security locking screws to retain the post. All ground sockets are powder coated to prevent corrosive attack of the aluminium by the concrete. Ground Sockets should be installed with no more than 30-60mm showing above ground level. Security locking screws should be orientated in the direction of the sign face and torqued to 18Nm2. Non-standard lengths are available to suit specific design requirements. All ground sockets supplied are fitted with a cap on the base. The cap acts as a pole stop and provides a significant advantage for installers as it prevents concrete from entering the socket when it is being positioned in the foundation. The ALL SIGN SYSTEMS Ground Socket is a purpose made product with a wall thickness of 5mm which prevents damage to the socket wall in accident situations - facilitating simple pole replacement. The ground socket for the 89,102 and 114mm diameter fluted poles have a raised internal wedge that the pole flute slides into to counter pole rotation. When used in concrete foundations, substantial enough to withstand crash impact, the ALL SIGN SYSTEMS Ground Socket has the following advantages: • Economical and time saving installations avoiding the use of props to support poles while concrete foundations cure. • Eliminates vandalism to poles/foundations before concrete has set. • Economical replacement of damaged poles with no need to dig out and replace foundations. Simply remove the damaged pole from the ground socket and replace. Only one site visit required, no construction workers or plant and the damaged sign is replaced with minimal delay.

$92.00

GRDSKT089X1-1.3M, GRDSKT 89MM 1001MM-1300MM

GRDSKT 89MM 1001MM-1300MM

The ALL SIGN SYSTEMS Ground socket is manufactured from strong structural grade 6261 T5 or T6 alloy with Stainless Steel T304 security locking screws to retain the post. All ground sockets are powder coated to prevent corrosive attack of the aluminium by the concrete. Ground Sockets should be installed with no more than 30-60mm showing above ground level. Security locking screws should be orientated in the direction of the sign face and torqued to 18Nm2. Non-standard lengths are available to suit specific design requirements. All ground sockets supplied are fitted with a cap on the base. The cap acts as a pole stop and provides a significant advantage for installers as it prevents concrete from entering the socket when it is being positioned in the foundation. The ALL SIGN SYSTEMS Ground Socket is a purpose made product with a wall thickness of 5mm which prevents damage to the socket wall in accident situations - facilitating simple pole replacement. The ground socket for the 89,102 and 114mm diameter fluted poles have a raised internal wedge that the pole flute slides into to counter pole rotation. When used in concrete foundations, substantial enough to withstand crash impact, the ALL SIGN SYSTEMS Ground Socket has the following advantages: • Economical and time saving installations avoiding the use of props to support poles while concrete foundations cure. • Eliminates vandalism to poles/foundations before concrete has set. • Economical replacement of damaged poles with no need to dig out and replace foundations. Simply remove the damaged pole from the ground socket and replace. Only one site visit required, no construction workers or plant and the damaged sign is replaced with minimal delay.

$104.74

GRDSKT089X1.3-1.6M, GRDSKT 89MM 1301MM-1600MM

GRDSKT 89MM 1301MM-1600MM

The ALL SIGN SYSTEMS Ground socket is manufactured from strong structural grade 6261 T5 or T6 alloy with Stainless Steel T304 security locking screws to retain the post. All ground sockets are powder coated to prevent corrosive attack of the aluminium by the concrete. Ground Sockets should be installed with no more than 30-60mm showing above ground level. Security locking screws should be orientated in the direction of the sign face and torqued to 18Nm2. Non-standard lengths are available to suit specific design requirements. All ground sockets supplied are fitted with a cap on the base. The cap acts as a pole stop and provides a significant advantage for installers as it prevents concrete from entering the socket when it is being positioned in the foundation. The ALL SIGN SYSTEMS Ground Socket is a purpose made product with a wall thickness of 5mm which prevents damage to the socket wall in accident situations - facilitating simple pole replacement. The ground socket for the 89,102 and 114mm diameter fluted poles have a raised internal wedge that the pole flute slides into to counter pole rotation. When used in concrete foundations, substantial enough to withstand crash impact, the ALL SIGN SYSTEMS Ground Socket has the following advantages: • Economical and time saving installations avoiding the use of props to support poles while concrete foundations cure. • Eliminates vandalism to poles/foundations before concrete has set. • Economical replacement of damaged poles with no need to dig out and replace foundations. Simply remove the damaged pole from the ground socket and replace. Only one site visit required, no construction workers or plant and the damaged sign is replaced with minimal delay.

$120.17

GRDSKT089X1.6-1.9M, GRD SKT 89MM 1601MM-1900MM

GRD SKT 89MM 1601MM-1900MM

The ALL SIGN SYSTEMS Ground socket is manufactured from strong structural grade 6261 T5 or T6 alloy with Stainless Steel T304 security locking screws to retain the post. All ground sockets are powder coated to prevent corrosive attack of the aluminium by the concrete. Ground Sockets should be installed with no more than 30-60mm showing above ground level. Security locking screws should be orientated in the direction of the sign face and torqued to 18Nm2. Non-standard lengths are available to suit specific design requirements. All ground sockets supplied are fitted with a cap on the base. The cap acts as a pole stop and provides a significant advantage for installers as it prevents concrete from entering the socket when it is being positioned in the foundation. The ALL SIGN SYSTEMS Ground Socket is a purpose made product with a wall thickness of 5mm which prevents damage to the socket wall in accident situations - facilitating simple pole replacement. The ground socket for the 89,102 and 114mm diameter fluted poles have a raised internal wedge that the pole flute slides into to counter pole rotation. When used in concrete foundations, substantial enough to withstand crash impact, the ALL SIGN SYSTEMS Ground Socket has the following advantages: • Economical and time saving installations avoiding the use of props to support poles while concrete foundations cure. • Eliminates vandalism to poles/foundations before concrete has set. • Economical replacement of damaged poles with no need to dig out and replace foundations. Simply remove the damaged pole from the ground socket and replace. Only one site visit required, no construction workers or plant and the damaged sign is replaced with minimal delay.

$189.75

GRDSKT102X1MWH, GRD SKT 102MM X 1M WH

GRD SKT 102MM X 1M WH

The ALL SIGN SYSTEMS Ground socket is manufactured from strong structural grade 6261 T5 or T6 alloy with Stainless Steel T304 security locking screws to retain the post. All ground sockets are powder coated to prevent corrosive attack of the aluminium by the concrete. Ground Sockets should be installed with no more than 30-60mm showing above ground level. Security locking screws should be orientated in the direction of the sign face and torqued to 18Nm2. Non-standard lengths are available to suit specific design requirements. All ground sockets supplied are fitted with a cap on the base. The cap acts as a pole stop and provides a significant advantage for installers as it prevents concrete from entering the socket when it is being positioned in the foundation. The ALL SIGN SYSTEMS Ground Socket is a purpose made product with a wall thickness of 5mm which prevents damage to the socket wall in accident situations - facilitating simple pole replacement. The ground socket for the 89,102 and 114mm diameter fluted poles have a raised internal wedge that the pole flute slides into to counter pole rotation. When used in concrete foundations, substantial enough to withstand crash impact, the ALL SIGN SYSTEMS Ground Socket has the following advantages: • Economical and time saving installations avoiding the use of props to support poles while concrete foundations cure. • Eliminates vandalism to poles/foundations before concrete has set. • Economical replacement of damaged poles with no need to dig out and replace foundations. Simply remove the damaged pole from the ground socket and replace. Only one site visit required, no construction workers or plant and the damaged sign is replaced with minimal delay.

$109.25

GRDSKT102X1-1.3M, GRDSKT 102MM 1001MM-1300MM

GRDSKT 102MM 1001MM-1300MM

The ALL SIGN SYSTEMS Ground socket is manufactured from strong structural grade 6261 T5 or T6 alloy with Stainless Steel T304 security locking screws to retain the post. All ground sockets are powder coated to prevent corrosive attack of the aluminium by the concrete. Ground Sockets should be installed with no more than 30-60mm showing above ground level. Security locking screws should be orientated in the direction of the sign face and torqued to 18Nm2. Non-standard lengths are available to suit specific design requirements. All ground sockets supplied are fitted with a cap on the base. The cap acts as a pole stop and provides a significant advantage for installers as it prevents concrete from entering the socket when it is being positioned in the foundation. The ALL SIGN SYSTEMS Ground Socket is a purpose made product with a wall thickness of 5mm which prevents damage to the socket wall in accident situations - facilitating simple pole replacement. The ground socket for the 89,102 and 114mm diameter fluted poles have a raised internal wedge that the pole flute slides into to counter pole rotation. When used in concrete foundations, substantial enough to withstand crash impact, the ALL SIGN SYSTEMS Ground Socket has the following advantages: • Economical and time saving installations avoiding the use of props to support poles while concrete foundations cure. • Eliminates vandalism to poles/foundations before concrete has set. • Economical replacement of damaged poles with no need to dig out and replace foundations. Simply remove the damaged pole from the ground socket and replace. Only one site visit required, no construction workers or plant and the damaged sign is replaced with minimal delay.

$127.89

GRDSKT102X1.3-1.6M, GRDSKT 102MM 1301MM-1600MM

GRDSKT 102MM 1301MM-1600MM

The ALL SIGN SYSTEMS Ground socket is manufactured from strong structural grade 6261 T5 or T6 alloy with Stainless Steel T304 security locking screws to retain the post. All ground sockets are powder coated to prevent corrosive attack of the aluminium by the concrete. Ground Sockets should be installed with no more than 30-60mm showing above ground level. Security locking screws should be orientated in the direction of the sign face and torqued to 18Nm2. Non-standard lengths are available to suit specific design requirements. All ground sockets supplied are fitted with a cap on the base. The cap acts as a pole stop and provides a significant advantage for installers as it prevents concrete from entering the socket when it is being positioned in the foundation. The ALL SIGN SYSTEMS Ground Socket is a purpose made product with a wall thickness of 5mm which prevents damage to the socket wall in accident situations - facilitating simple pole replacement. The ground socket for the 89,102 and 114mm diameter fluted poles have a raised internal wedge that the pole flute slides into to counter pole rotation. When used in concrete foundations, substantial enough to withstand crash impact, the ALL SIGN SYSTEMS Ground Socket has the following advantages: • Economical and time saving installations avoiding the use of props to support poles while concrete foundations cure. • Eliminates vandalism to poles/foundations before concrete has set. • Economical replacement of damaged poles with no need to dig out and replace foundations. Simply remove the damaged pole from the ground socket and replace. Only one site visit required, no construction workers or plant and the damaged sign is replaced with minimal delay.

$145.53

GRDSKT102X1.6-1.9M, GRDSKT 102MM 1601MM-1900MM

GRDSKT 102MM 1601MM-1900MM

The ALL SIGN SYSTEMS Ground socket is manufactured from strong structural grade 6261 T5 or T6 alloy with Stainless Steel T304 security locking screws to retain the post. All ground sockets are powder coated to prevent corrosive attack of the aluminium by the concrete. Ground Sockets should be installed with no more than 30-60mm showing above ground level. Security locking screws should be orientated in the direction of the sign face and torqued to 18Nm2. Non-standard lengths are available to suit specific design requirements. All ground sockets supplied are fitted with a cap on the base. The cap acts as a pole stop and provides a significant advantage for installers as it prevents concrete from entering the socket when it is being positioned in the foundation. The ALL SIGN SYSTEMS Ground Socket is a purpose made product with a wall thickness of 5mm which prevents damage to the socket wall in accident situations - facilitating simple pole replacement. The ground socket for the 89,102 and 114mm diameter fluted poles have a raised internal wedge that the pole flute slides into to counter pole rotation. When used in concrete foundations, substantial enough to withstand crash impact, the ALL SIGN SYSTEMS Ground Socket has the following advantages: • Economical and time saving installations avoiding the use of props to support poles while concrete foundations cure. • Eliminates vandalism to poles/foundations before concrete has set. • Economical replacement of damaged poles with no need to dig out and replace foundations. Simply remove the damaged pole from the ground socket and replace. Only one site visit required, no construction workers or plant and the damaged sign is replaced with minimal delay.

$174.20

GRDSKT114X1MWH, GRD SKT 114MM X 1M WH

GRD SKT 114MM X 1M WH

The ALL SIGN SYSTEMS Ground socket is manufactured from strong structural grade 6261 T5 or T6 alloy with Stainless Steel T304 security locking screws to retain the post. All ground sockets are powder coated to prevent corrosive attack of the aluminium by the concrete. Ground Sockets should be installed with no more than 30-60mm showing above ground level. Security locking screws should be orientated in the direction of the sign face and torqued to 18Nm2. Non-standard lengths are available to suit specific design requirements. All ground sockets supplied are fitted with a cap on the base. The cap acts as a pole stop and provides a significant advantage for installers as it prevents concrete from entering the socket when it is being positioned in the foundation. The ALL SIGN SYSTEMS Ground Socket is a purpose made product with a wall thickness of 5mm which prevents damage to the socket wall in accident situations - facilitating simple pole replacement. The ground socket for the 89,102 and 114mm diameter fluted poles have a raised internal wedge that the pole flute slides into to counter pole rotation. When used in concrete foundations, substantial enough to withstand crash impact, the ALL SIGN SYSTEMS Ground Socket has the following advantages: • Economical and time saving installations avoiding the use of props to support poles while concrete foundations cure. • Eliminates vandalism to poles/foundations before concrete has set. • Economical replacement of damaged poles with no need to dig out and replace foundations. Simply remove the damaged pole from the ground socket and replace. Only one site visit required, no construction workers or plant and the damaged sign is replaced with minimal delay.

$128.80

GRDSKT114X1-1.3M, GRDSKT 114MM 1001MM-1300MM

GRDSKT 114MM 1001MM-1300MM

The ALL SIGN SYSTEMS Ground socket is manufactured from strong structural grade 6261 T5 or T6 alloy with Stainless Steel T304 security locking screws to retain the post. All ground sockets are powder coated to prevent corrosive attack of the aluminium by the concrete. Ground Sockets should be installed with no more than 30-60mm showing above ground level. Security locking screws should be orientated in the direction of the sign face and torqued to 18Nm2. Non-standard lengths are available to suit specific design requirements. All ground sockets supplied are fitted with a cap on the base. The cap acts as a pole stop and provides a significant advantage for installers as it prevents concrete from entering the socket when it is being positioned in the foundation. The ALL SIGN SYSTEMS Ground Socket is a purpose made product with a wall thickness of 5mm which prevents damage to the socket wall in accident situations - facilitating simple pole replacement. The ground socket for the 89,102 and 114mm diameter fluted poles have a raised internal wedge that the pole flute slides into to counter pole rotation. When used in concrete foundations, substantial enough to withstand crash impact, the ALL SIGN SYSTEMS Ground Socket has the following advantages: • Economical and time saving installations avoiding the use of props to support poles while concrete foundations cure. • Eliminates vandalism to poles/foundations before concrete has set. • Economical replacement of damaged poles with no need to dig out and replace foundations. Simply remove the damaged pole from the ground socket and replace. Only one site visit required, no construction workers or plant and the damaged sign is replaced with minimal delay.

$149.94

GRDSKT114X1.3-1.6M, GRDSKT 114MM 1301MM-1600MM

GRDSKT 114MM 1301MM-1600MM

The ALL SIGN SYSTEMS Ground socket is manufactured from strong structural grade 6261 T5 or T6 alloy with Stainless Steel T304 security locking screws to retain the post. All ground sockets are powder coated to prevent corrosive attack of the aluminium by the concrete. Ground Sockets should be installed with no more than 30-60mm showing above ground level. Security locking screws should be orientated in the direction of the sign face and torqued to 18Nm2. Non-standard lengths are available to suit specific design requirements. All ground sockets supplied are fitted with a cap on the base. The cap acts as a pole stop and provides a significant advantage for installers as it prevents concrete from entering the socket when it is being positioned in the foundation. The ALL SIGN SYSTEMS Ground Socket is a purpose made product with a wall thickness of 5mm which prevents damage to the socket wall in accident situations - facilitating simple pole replacement. The ground socket for the 89,102 and 114mm diameter fluted poles have a raised internal wedge that the pole flute slides into to counter pole rotation. When used in concrete foundations, substantial enough to withstand crash impact, the ALL SIGN SYSTEMS Ground Socket has the following advantages: • Economical and time saving installations avoiding the use of props to support poles while concrete foundations cure. • Eliminates vandalism to poles/foundations before concrete has set. • Economical replacement of damaged poles with no need to dig out and replace foundations. Simply remove the damaged pole from the ground socket and replace. Only one site visit required, no construction workers or plant and the damaged sign is replaced with minimal delay.

$171.99

GRDSKT114X1.6-1.9M, GRDSKT 114MM 1601MM-1900MM

GRDSKT 114MM 1601MM-1900MM

The ALL SIGN SYSTEMS Ground socket is manufactured from strong structural grade 6261 T5 or T6 alloy with Stainless Steel T304 security locking screws to retain the post. All ground sockets are powder coated to prevent corrosive attack of the aluminium by the concrete. Ground Sockets should be installed with no more than 30-60mm showing above ground level. Security locking screws should be orientated in the direction of the sign face and torqued to 18Nm2. Non-standard lengths are available to suit specific design requirements. All ground sockets supplied are fitted with a cap on the base. The cap acts as a pole stop and provides a significant advantage for installers as it prevents concrete from entering the socket when it is being positioned in the foundation. The ALL SIGN SYSTEMS Ground Socket is a purpose made product with a wall thickness of 5mm which prevents damage to the socket wall in accident situations - facilitating simple pole replacement. The ground socket for the 89,102 and 114mm diameter fluted poles have a raised internal wedge that the pole flute slides into to counter pole rotation. When used in concrete foundations, substantial enough to withstand crash impact, the ALL SIGN SYSTEMS Ground Socket has the following advantages: • Economical and time saving installations avoiding the use of props to support poles while concrete foundations cure. • Eliminates vandalism to poles/foundations before concrete has set. • Economical replacement of damaged poles with no need to dig out and replace foundations. Simply remove the damaged pole from the ground socket and replace. Only one site visit required, no construction workers or plant and the damaged sign is replaced with minimal delay.

$203.96

ALL SIGN SYSTEMS Limited , 31 Maurice Road, Penrose, Auckland, New Zealand 1061
Call us now:  

09 930 1258

ALL SIGN SYSTEMS LIMITED ©2024